Quote:
Originally Posted by amg280
When I pull the cross-over piped off, is there an o-ring or seal i should replace where it detaches on the passenger side (above the turbo)? There are no bolts there so i assume it just pulls out one you remove the two allens from the other end.
|
There is an O-ring on that side, but these are typically reusable for dozens of R&R's, as long as it's not damaged. They're expensive, so I wouldn't bother replacing it unless it's cracked, torn, or brittle. I also re-use the oval gasket at the opposite end if I expect to be taking the pipe off again, that one also can be re-used at least a few times...
