The rolls has a full on Circuit board. So if one circuit goes you have to replace the board at the tune to lots of $$$$$

So instead I soldered a blad fuse holder on, and the problem he had was solved for $2.99 not A Ridiculous cost int hye thousadns.

I'd say check a local marine supply store. They should have some good fuse blocks you can use.

Alon

__________________
'92 300CE - Sold
2004 C240 - 744 - C7 Wheels - Android Radio
2002 C320 - 816 - Sport Wagon - Sold
2006 E350 Wagon - 368 - Dead
2015 GL350 Bluetec - 197U