Originally Posted by Knightrider966

I'm not sure how you did this in the first place since the drain plug in mine is plastic, isn't yours? I would think you could put a plastic epoxy on the drain plug and thread it back in and it would hold, but of course now you'll have to pull your lower hose to drain your coolant, a messy proposition. I would remove the radiator and clean the drain plug and mount with Alcohol to remove all coolant and then using a 2 part epoxy, mix what you need and spread it on your drain plug and plug hole and then re-insert it. Wait for it to thoroughly dry and you should be fine. I think JB Weld would be good for this! JB weld is plastic safe.