Quote:
Originally Posted by Jim Villers
Arthur .... Yes, it has been a while. With your 5K responses, I can see where you have spent your time after your 2K responses on the pagoda board. I am slow, I only have 3K with the 190SL Group.
Anyway, the OVP was also my guess as that would explain the lack of a malfunction code (still with the reader you send me in 2001). So I have a new 00 540 67 45 in my hand that I'll install tomorrow. If that dosen't work (or change anything) I am not sure where to look. I'll post the results tomorrow morning.
Thanks again, you always seem to be around when I need assistance.
|
Very good..I think the OVP will do it..if not , we will go to the next step, but those HFM/SFI OVP set-ups are infamous and where we always start b/c that chassis is full Electronic and OVP is mandatory..if you pull it, the car will not run , whereas on the earlier models the car would still run b/c OVP was just on the control side. It is nice to see you have a single flash on pin 8..that is a real good sign on that chassis ..most have somethin in there..I think that new harness took care of that.
Have not been at Pagoda much..but I do go over once in a while to read some of those long -winded post.....
......and I mean Looooong..
Nice talkin' to you again.