|
<<
>>
Jim,
I did not see this added info when I wrote you my last posting b.c you added it while I was answering the original posts..
.... but , with that new info, that would certainly help confirm my suspect of the coil connectors under each coil...
If the N59 DM sees a malfuntion from the HFM ignition system, it brings on a pending code before CE lamp activation ..if it does not see subsequent repeat failures , it will drop it as a viable fault before it activates the CE. [ intermittant problem]
If you have coil problems , they are output/current monitored by HFM Ignition Module via pin 8 and would show as a code 21/22/23, depending on which one was in question..
So , with this added info from the DM, we are back to coil connectors as first possible suspect...and plugs while you are in there... this will most likely turn out to actually just being your basic/common HFM/104 ignition connector failure complaint/remedy.
Have fun..............
__________________
A Dalton
Last edited by Arthur Dalton; 04-12-2008 at 06:10 PM.
|