04-12-2008, 10:45 PM
|
 |
WECO Installer
|
|
Join Date: Jul 2006
Location: Tampa, FL
Posts: 820
|
|
Quote:
Originally Posted by costanza
This section of the Haynes manual directly contradicts MBDOC 
Who to believe? I need to know.
 |
Fronts
7a Install torsion rubber mounts in such a manner
that the flats (arrows) are horizontally resting
against front mount.
7b On model 201.034 install rubber mounts at the
rear in such a manner that the flats (arrows) are
vertical.
Rears
6 Insert rubber mount into wishbone.
Note: The two surfaces of the aluminum core
(arrows) must be vertically located with wishbone
installed.
http://web.archive.org/web/20060526113805/mb.braingears.com/201_DISK1/PDF/10005.pdf
__________________
1993 190E 2.3
2001 SLK230
1971 LS5 (454) Corvette Convertible
|