OK, I jumped the fpr fuel pumps are working.
checked for spark at distributer have spark.
loosend the main fuel line entering the fuel dist,
jumped the fpr and fuel sprayed out immediately lots of it.
So i have spark and fuel but motor still wont start.
As engine was being cranked I pushed down on the round plate
and it backfired, dont know what that means... but still no start.
When I first start cranking it over it comes very close to starting up.
I then have to wait a little while to get the same result.
Not sure what to check next maybe the OVPR or the warmup relay?

Thanks again for your help!!
Don