Quote:
Originally Posted by EricSilver
I am doing this repair now.
I have the shifter linkage unbolted, but the linkage it not sliding off the metal pin/bolt that connects it to the switch. The outer part of the 'U' shaped connection slid over the bolt/pin but the inner part has not. Before I try to pry it off, is it supposed to slide off, or does that pin/bolt come out as well?
|
I'm not sure exactly what you are trying to describe. You have to completely remove the clamp bolt to be able to slide the arm off the shaft. Also, when you get it off look at the plastic arm on the switch (which engages the metal arm) and you will see a small hole that is intended to be used to align the switch. With the gear selector in neutral, the hole in the plastic arm lines up with a hole in the switch body. Insert a pin to align the two holes before you tighten the switch to the transmission. If this isn't clear, do a search and you will find some diagrams.