Yeah, I remember him now..I posted the schematic but then I dropped it for room...bummer ..that would make it easy for you to follow

Well, anyway, you get the picture from that thread, but I will run this by you...

We will start at x27 and work back to ign switch:

V/W from x27 goes thru the main cabin firewall and down under the the drivers side dash [around the gas pedal area]...look there and you will see a 4 prong plug-X49/2.
The V/W will be #4 of that plug and #3 will be V/Grn...those 2 wires go to NSS..so, put the gear shift in P and jumper those two wires [V/GRN and V/W]..then try the starter w/ign key...if YES , then you need a NSS ..if NO , we have to go to next circuit [ which is K38]

Also, You said you checked all fuses , but recheck 11,12, and specially 'B" for ATA led activation power....

__________________
A Dalton