Quote:
Originally Posted by turbobenz
the wet results are fine and there is little variance between each cylinder. Dont see anything wrong here
|
Service manual says minimum compression should be 220 psi. The dry results are failing this spec. Will I be able to get it to start??
I removed the injectors to perform the test. I am going to get injectors professionally serviced. I am replacing all glow plugs and 80A fuse. I have brand new primary, secondary fuel filters. New primer pump. Ball check valve is chirping when I stroke the primer. No air in fuel.
My concern is if I am too low on compression on the dry test with cold engine to enable starts.