I use a Craftsman 1/2 in drive deep socket #47532 to remove the injectors. it works fine for me and deep enough for the injector to fit all the way in.

replace the heat shields when you remove the injectors. I have reused mine when I didn`t have new ones on hand and seemed to get away with it. don`t recommend it, think I was doing it under a shade tree.

use the proper return line from the injectors, and the last one has a plug in it. I reuse the plug, just slice the rubber and replace it in a new piece of hose.

That`s a beautiful car you have, I love the CD`s, not many around. just don`t drive it in your winter salty conditions. get an old Ford for your beater.

Charlie ☺

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works