|
I had some time to run down to my shop and fixed one leak ...the O-rings for the drain back tube on the aircleaner and down tube , I still think I need the Grommet for the turbo return .
I also played around with the vacume control valve on the injection pump , I used a hand vacume pump with a guage , it seem to be sticking in side , I used some spray silicone and lubed her up and it started to work perfect ...it would hold a constant vacume in the throttle closed position and as i gradualy opened the throttle it would hold a steady bleed down to a 5 lb constant at wide open throttle .
I also found that all the hose's on the 2/3 valve were loose and leaking , for the time being I used small zip ties on the valve till I decide if I am going to remove it , I am not sure if my egr is even working .
I cleaned the air cleaner and turbo ... The under hood pad is starting to fall apart and get sucked into the aircleaner ... for now I pulled off all the really dried pad til I pick one up .
The valve cover is still leaking pretty good , here are a few pic's of the injectors leaking before the valve cover gasket started to leak.
Thanks guys
greg
|