Hi All,

I'm in the middle of replacing the a/c clutch on my 240D. The wires that connect to the field coil at the back of the coil have broken off and I need to remove the entire clutch with field coil to repair or replace with new. Anyway, I've removed the front clutch plate and as I am looking down into the shaft there are two snap rings. The front snap ring is large and is towards the front and appears to be in front of the bearing. The second snap ring is small and is way towards the back at the base of the shaft. Do I pull both snap rings or will just one snap ring release the coil/clutch assembly?

Thanks all