Thread: prop-shaft center bearing diagnosis
View Single Post
  #3  
Old 06-13-2008, 09:33 PM
280EZRider's Avatar
280EZRider 280EZRider is offline
No Dumping
  
Join Date: Jul 2007
Location: Southern Oregon Valley
Posts: 1,631
In most cases, the rubber donut that holds the bearing in the mount is what goes bad. It should be somewhat flexible and you should be able to move the shaft about 1/4 inch side-to-side. If you can't, the rubber has probably hardened and bearing & donut must be replaced.
__________________

Don't Chrome them; polish them
Reply With Quote