Quote:
Originally Posted by NoSparkNeeded
My strainer is the one with the giant "allen wrench" hole. I'm off to
the store right now to see if I can find one. The fuel return line idea
is what I'll do, plus I have a 12+ quart oil drain pan as a back up. I may do this project
today. I'll report back. Thanks for the advice. This forum sure is
a goldmine of information. I get things accomplished many times
faster with a good idea where to begin on things.  |
See if you can find a 7/8 wrench, I believe thats close.
It took me a little filing to fit, just a few mils off each flat. I worked at a place where they had stock in all kinds of hex wrenches but no large metric, so I had to make-do.
If your screen has any gunk in it try some carb cleaner or brake cleaner to dislodge the stuff. Or a shot of compressed air.