
06-20-2008, 12:22 PM
|
 |
Registered User
|
|
Join Date: Jun 2008
Posts: 835
|
|
Quote:
Originally Posted by G-Benz
Yeah...I thought it was a characteristic sound of gas furnaces...I remember the same in homes that I grew up in.
|
They say the 90% efficient ones have a completely encapsulated burner assy. Also because of other elements of the design, the intake and exhaust are vented by way of pvc. Anyway, they say they are much quieter in operation than the 80% ones. I wish the morons who sold me mine would have mentioned this. Evidently they didn’t feel it important enough to mention. Anyway, our older furnace used a burner that looked more like something found in bbq grills. From the perspective of inside the house it was quiet in operation.
Quote:
|
I'm not sure you can do much with solid ductwork...noise transmittal is guaranteed.
|
One of the points of debate is whether it’s wise to use flex ducting. The pro side is that it will help to decouple the furnace from the duct work, and help eliminate transmitted noise. The con side is that, accordingly, rodents can easily eat their way through the ducting.
There is a kind of ducting which is rigid, but which has dense insulation lining on the inside. It is pricy enough that it will be less cost to just buy a 90% efficient furnace.
I’m thinking of replacing the plenum with a bigger one, and using many layers of noise absorbing material as a kind of baffle. The idea is similar to that used in glass pack mufflers. I don’t know if rigid noise absorbing material is going to have better results than soft material. I haven’t found anything that specifies the sound dampening qualities of the material.
|