Quote:
Originally Posted by GDR1888
I don't have an impact so i guess i'll have to do it by hand. That sucks. Also i'm kind of concerned about the bolts that are holding the block on the stand. I'm affraid that they will snap because of the torque applied on the breaker bar. By the way it is an m103.
|
If you already have it on a stand, rent an impact. I got mine off with a 3/8" impact, get a 1/2" if you can. 1 and 1/16" socket will work too. Use lots of penetrent and maybe a little heat from a blow torch.
__________________
Current Stable:
01 ML55 AMG
92 500E (a few mods)
87 300E (lots of mods)
00 Chevy 3500HD Diesel Box Truck
68 18' Donzi Marine 
06 GT i-Drive7 1.0 Mountain Bike (with GPS!  )
PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320
|