Quote:
Originally Posted by aklim
Per MB spec, new nozzles were to be around 115-125 which is where most were. 2 were at 140. Spray pattern was good. Cost me $25 to test and readjust the 2 that were out.
Notes:
Pop tested and reset 2 injectors that were at 140 BAR. Others were at 125 BAR spec. Made no other repairs.
|
The reason I was curious some people feel they can swap the nozzles and not have them pop tested. In this case 25bar difference between the highest and the lowest is a considerable difference (to me). I think the $25 was well spent.