I think you are reading the return VOLTAGE from the MAF sensor, at idle & that should be around 1V.
The correction factor(partial load) at 1.25 is the figure that will turn the check engine lamp on.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator