Well it looks like it's the brake light switch. I have 12.x volts DC from the fuse to the switch. I also have continunity from post to post on the brake light switch when the pedal is pushed but it doesn't appear that the 12.x volts connects inside the switch. I think it's the switch but I'm not sure why in the heck I get a good ohm reading when the brake pedal is depressed but no voltage?? I'll replace the switch. next question...when I remove the switch, a small amount of brake fluid comes out. Do I have bleed the brake lines at the wheels or just at the top of the master cyl???