Quote:
Originally Posted by zsmith29
Thus far I have ruined 2 axles by trying to bang them in. (thank goodness for the auto parts return policy)
Basically the hub will not receive the axle. I have gotten a file and I am filing the hub down so that the axle might fit.
Is there anything else I can do to get the axle to go in the hub other than change out the entire arm??
This is a nightmare situation.
|
DO NOT FILE!!!
Try turning the hub/axle and finding a point where they are happy.
Make sure the hub splines are clean. Small wire brush helps here.
Only touch up any burrs with a file. Do NOT file the splines!
Try putting the axles in the freezer.