Saturday morning update:

Ok, bypassed the switch at the console with jumper wires going from the hot lead and ground (on the female switch wiring plug) directly to the motor wires (blk/wh, gr/yellow). I have current but the motor will hardly move up or down. Note* this is the same motor in the door, that when using external power from a 13.8 power supply, works fine. There is no binding of the window glass in the tracks to cause any kind of hanging up.
It appears that the internal wiring just can't produce the juice needed to operate the window. The drivers side has no problem. I even connected an extra motor to the passenger side wiring and the same thing.

I also ran two single wires from the battery pos and neg terminals to the motor wires and the window operates fine. It is definatly not the motor. It appears that somewhere, somehowm the voltage is being dropped in the wiring harness at the console. Would the window switch relay under the hood be a possible culprit?