Update:

Tested the window motor with both power supply and direct current from the car battery at the motor wiring at the door.(Disconnected from the console wiring harness), motor operates fine, window goes up and down with ease at normal speed. Jumped a set of wires from the driver door window wiring to the passenger window motor wiring and it works with ease. Tested with the left driver console switch connected and it works fine. Hooked everything back up and the passenger side window connected to the passenger console switch and it won't go up and down without hand help. Bypassed the console switch to the window motor and it won't work well. Apparently the right side wiring is the culprit from the relay to the switch. Check the relay under the hood and it is fine. Switches check out fine. I think I'm just going to figure a way to bypass the harness and run a new source of current to the switch. Also, disconnected the rear door motor, thinking that was maybe drawing on the voltage. Did, and no change.