Quote:
Originally Posted by hcloseuk
i have a 1989 2.6 auto that refuses to start all ignition items have been replaced and getting a good spark/ fuel pumps have been checked and are both fine also a new fuel filter has been fitted its getting fuel to the distributor head ok but does not seem to be getting through the injectors i have been told a possible faulty fuel distributor head then some say they are very reliable rarely give problems any ideas would be very gratefull
|
You might have a stuck plunger in the fuel distributor.
The first thing I would do is verify that the hoses going to and from the Idle Control Valve are secure at both ends. If they are, then I would remove the air cleaner and while someone is cranking the engine, slightly push down on the air flow sensor plate. This will allow fuel to spray out of the fuel injectors proving the pressures are in range.