Thread: 1993 300ce New Tumbler, Won't Start
View Single Post
  #8  
Old 10-03-2008, 09:13 PM
Arthur Dalton Arthur Dalton is offline
Registered User
  
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Disconnect of ATA module will open circuit for K38 coil at Pin #1 of N26 ATA module and no coil V results in No Start b/c k38 has to be live for Start, dead for interlock. So, that would be the same as bad fuse 'B" coil feed to K38...No Starter activation b/c contacts 30/87 would be OPEN , opening circuit to NSS.
The circuit goes ..IGN sw to k38.. K38 to NSS .. NSS to X27 ..X27 to starter solinoid. That is where we started ..X27..
K38 MUST be jumpered if you disconnect ATA module...and the reason for that is if someone rips out your ATA module , the car will still not start.
__________________
A Dalton
Last edited by Arthur Dalton; 10-03-2008 at 09:24 PM.
Reply With Quote