Quote:
Originally Posted by sixto
If there's a temp sensor just ahead of the thermostat, it might help to remove the temp sensor so you can remove the radiator hose fitting more easily. In some applications there's just enough room to slide the radiator hose fitting forward and out. No room to pull it directly away from the block. Mind you remove only radiator hose fitting bolts, not the thermostat housing bolts. Doing so you might upset the gasket between the thermostat housing and the block.
|
I do have the temp sensor just in front of the thermostat housing, I did not start on changing it because I a still waiting delivery on the thermostat and the o-ring so I haven't looked in detail at the housing , but after looking at the diagrams that compress ignite sent I see only 2 bolts that hold the t-stat housing, but I will go tomorrow and take a good look and see if there are any other bolts. Also I found that for coolant I can use Zerex G05 from Pep Boys, is it gonna work or you have other suggestions for coolant fluid.
Thank you