Quote:
Originally Posted by Cr from Texas
I did the above with a slight modification. After cleaning, I fitted and held my pad in place using several magnets (actually magnets parts pans). When I was happy with the fit, I did half of the pad at a time. Pad stayed exactly where I had test fitted.
|
Thought of that but my hood is aluminum, so that didn't work. I used some painters masking tape to hold in place. Got a good front to back lineup, but side to side was off a little. Had to do some trimming with a razor blade. Not factory perfect, but 100% better than it was!
I dread taking this thing off to redo and hope I get in same place. Hate standing on my head to work! Oh well.