Quote:
Originally Posted by 84 500SL Euro
Thanks for the tip on the wire. Suggestion as to source ?
Yes, there is a magnet in it. Is your example a single bolt mount as opposed to the later with a metal attached mounting bracket with two holes ?
Thanks for the responses and if the poster that also plans on this pursuit would let me know about success and how it was accomplished, I'd be most grateful.
Courtney
|
I have never had a bad abs sensor so I have not taken one apart (I do dissect almost everything that fails before actually replacing). My experience with other sensors with coils in them is that if you are lucky the break is at the ending of the winding so that you can unwind enough to make a new connection. If it is at the start of the winding then it may be impossible to get enough wire to make a connection.
As for a source of fine strand flexible wire, I have used the leads of a multimeter.