Its been a couple weeks but, I still have not figured outthe problem. I took the starter to autozone to have them test it they said it was good. However when reinstalling it I saw that the smaller guage wires going from the starter to the junction box had rubbed against the chassis causing a short. (One actually looked like it had burn marks on it.) So I wrapped them in electrical tape and reinstalled everything. I connected the positive cable and then the negative cable and it shorted so bad that the metal melted a lil' bit.
Well I tried uploading a pic but the computer isn't reading my sd card.
But my junction box goes something like

/\ To Firewall

|white wire to the starter (goes to bolt that the positive battery cable goes to)
_______________________________
|One thick and two smaller gauge wires that go through the firewall on pass. side. One of them looks like it was cut.
________________________
|Purple wire and another white wire that goes to the starter but this one has a crew that holds it in.

\/ To front of car

__________________
'84 300D w/ 120,___
I wish I had money to buy new shocks.
:-(