|
Very hot 300TE with Low (& High??) cooling problem
Guys
I don't mean to takeover this thread, but I have been reading quite a few since my temp gauge went to 120+ in traffic a couple of days ago (ambient temp was 32C or about 95F). I tried to get the fans to come on by turning on the A/C but they refused, so I managed to lower it by turning down some side streets & getting some air through the radiator.
A/C works well & the belt driven fan clutch was renewed last year & seems to be working OK.
I've tried to do some tests and so far today (35C) I have had 1 fan come on high at about 95-100C with the A/C on a short trip (right side looking at it from the front - your driver side).
Later I removed the Temp guage connector (which looked a bit beaten up) and the same fan came on high, but nothing from the other one.
When I bridged the plug I heard relays switching near the fusebox & near the A/C drier but no Low fan came on - in either of the fans.
I also tried bridging the each side of the Low fan resistor with 12v - but nothing happened with either side fan. Though I may not have done this correctly?
Does this mean -
I have at least 1 fan that's dodgy;
I possibly have a Resistor that's stuffed;
Possible other problems...
Any help greatfully accepted.
PS - something else I was wondering is that when all of the R12 was replaced with R134a a few years back, how does this affect the psi readings from the A/C for the Low speed fan? Are they close enough?
Cheers
Stu
Last edited by Stu17; 11-11-2008 at 07:10 AM.
Reason: can't spell - mixed up which fan...
|