Quote:
Originally Posted by awsrock
You know what, my sending unit (you mean Y30?) is not bolted to anything, it is just kinda hanging there! I'll try to attach it to something so it is sitting right side up and see if that helps at all.
Or are you talking about the two pronged connection next in the middle of the manifold? I haven't done anything with that, so I can check on it as well.
I'd still like to see that ALR test though, if you could send it once you find it.
Thanks
|
Listed in Fast Lane as "Boost Pressure Sensor"
It's rather heavy for its size and can get clogged with soot. DO NOT over tighten it. IF the hole is stripped, it can be helicoiled but the kit is kind of 'spendy.' (mmm hmm first hand experience
) It's 12 x 1.5 mm and isn't a commonly used thread.