|
for the stalling/Cold start:
1. no speed signal from the speedometer to the cise control unit
2.crankshaft postion sensor
3. EZL ignition system
4.electrical connections at ignition coil
5. Sockets of OVP and fuel pump relay bad solder connections
6. cise control unit
7. A/C compressor control unit
8. cold start valve
9. loose connections(grounds, cise wiring harness
10. Internal fuel leakage
had a similar problem on a 190E 2.6 and it turned out to be an internal fuel leakage problem. You may also have malfunction cise components
__________________
1986 300SDL, 211K,Dealership serviced its whole life
1991 190E 2.6(120k)
1983 300D(300k)
1977 300D(211k)
|