Quote:
Originally Posted by hihosilver
my 86 300e with 157000 miles runs great but has started vibrating under load acc, motor mounts were changed, trans, rubber drive joints aren't very old, new tires, everything under the car is tight, also just changed cam and rockers, 15000 on valve job, just can't figure whats vibrating, any ideas, thanks
|
you might want to think about haveing the trans checked it could be slipping and that is called a shudder in transmission terms if you put the gas on the floor from a dead stop and the enging starts to free wheel than its a go on a rebuild the band servo is not holding, the seals in it get hard from the heat cycles of 150,000 miles and it does not have the ability to hold the drum from turning when it is susposed to hold it still hence the shudder or vibration - jz