Quote:
Originally Posted by DeliveryValve
Try swapping an injector from one of the good cyllinders.
Make sure the crush washer is seated propertly with no debris in the area.
And shine a flashlight look down the prechamber to make sure it has not self destructed.
|
Already checked the prechamber last night, looks fine. I've swapped injectors many times, its surely seated properly....I tried two different good injectors with similar results. Low compression possibly? Valve problem? I think we might get a tester and check the compression levels....
Biggest question is why would this have happened after a valve adjustment? Perhaps having the valves in spec made a pre-existing issue worse?
__________________
-diesel is not just a fuel, its a way of life- 
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|