Quote:
Originally Posted by veggie190
Thanks! I'll use a bic to heat it up and spray some PB blaster in there...
Chad300tdt
Was it hard to install keyless entry? Maybe I'll do that when it's warm out!
|
It wasn't bad. It took a couple hours. I got my central vac locks all working properly and then just used the master solenoid to operate the driver door lock.
The hardest parts were fishing the wires through the rubber accordian at the door hinge and locating the master solenoid and push/pull rod so they wouldn't bind with the power window.
The keyless entry I installed is ONLY for the door locks but an alarm could be added later.
I used this one:
http://cgi.ebay.com/ebaymotors/REMOTE-POWER-DOOR-LOCK-NEW-UNIVERSAL-Actuator-MOTORS-M_W0QQitemZ380089383492QQihZ025QQcategoryZ33723QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ht_4715wt_1086
I tapped power from the fuse for the clock and grounded near the E-Brake.
EDIT: I just bought another one for my wife's daily driver CD.
I guess she'll have keyless entry for Christmas.
