Quote:
Originally Posted by duxthe1
................ once the cover is off you should be able disassemble the latch mechanism .
|
Can't see anything to disassemble...no screws.....the latch "cage" is molded into the back of the glove box....
Quote:
Originally Posted by duxthe1
......... then compress the retaining tabs (4 I believe) allowing the slider knob to pull out of the front.
|
I see four "tab"s that the latch slider rides on...but they don't seem to give any or depress at all...have pushed on them pretty hard with a pair of screwdrivers...(only have two hands).
Also seems like the slider should be spring loaded somehow but there's none...it just slides back and forth and stays put whereever you leave it.
WC