Hello MB Doc:
I thank you for your reply. I forgot to mention that the lights on the instrument cluster light up (as well as engine light). The wire coming from ignition switch to the pulse module when in start position is pink in color and from this module going to nss and the other switches from the 6 pin connector. This is where I need help I do not know which wire the pink wire will go to on the nss and which wires the other 5 correspomd to each other. I have tested the 4 wires coming from nss and 2 of them give me continuity when the car is in park or in neutral only. I am guessing the nss is ok because of this( I also tried the trick to put the car in neutral and try to move the lever with right hand as I try to start the car with the left in trying to start the car with no luck. I have mentioned that the switch located to the back of the tranny has a wire that is nit connected anywhere and I tried to find where it goes with no luck ( iam thinking kickdown switch). If i am getting power goin to nss from the pink wire's which wire do they go to nss (4 wires 2 black one red and one white or brown) and which wire color from nss goes to starter solenoid? I tried to get the dealer to give me the wiring diagram with wire color codes but no luck. I was however able to get the wiring harness part number 210-540-00-08 but they do not show where the wires go and what color they are. Thanks MB doc for your help. Is this 6 pin connector the x75 connector i was reading for other cars?