Quote:
Originally Posted by TMAllison
Piston = 7i Valve Element?
7G below it is the one that needs to be observed if it was distrubed. There is a tab on it which if misaligned can break off or deform the insides when torqued.
|
I did notice the tab, and as far as I can tell, the part won't go into the pump all the way unless it's aligned correctly. When I took it back out the first time, I did notice the crush washer seemed CRUSHED. So, I might have not had it aligned correctly orginally and/or overtorqued it.
I'm going to take it apart again tomorrow and photograph everything. I really appreciate the input & assistance! - Tim