Quote:
Originally Posted by 280EZRider
My first guess is that you fried the gears by spinning the cable w/your drill. If the speedo works, then the original problem was probably a bad cable. The speedo can be spun - slowly - w/a drill to check it, but I don't believe the cable can; hence, the fried gears.
|
HAHAHAHA...that's funny!!!! I guess I should have been more clear, I put the drill on the end of the cable that I removed from the tranny with the other end still connected to the back of the speedo, so I could actually see the needle on the speedometer move. I wouldn't be able to tell if the speedo was good if I put the drill on the end that I unplugged from the back of the speedo...
(Sorry, it's been a REALLY long day, I don't mean to sound like a jerk...)