Hi cc260E,
Quote:
|
When I remove the hose, the engine stalls immediately
|
This is normal, you just throw the duty-cyle to the lean side.
Quote:
|
If I understand correctly, the little pipe is clogged on the inner side of the valve cover.
|
Not really, let me recap. with photo:
On the photo the red mark I do inside the circle, it is where the orifice is located.
Again you do not have to removed your valve cover to clean this orifice, just unplug the hose and insert your .080inch (2.0mm) drill in, then find the small orifice and try to go in the orifice, the drill should go in about 2 inch (50mm). If it doesn't go, start with a smaller drill and work your way up to the .080inch(2.0mm) drill
Is it clear now?
Max