Quote:
Originally Posted by Arthur Dalton
Clear the memory on that pin...you want to get adaptations back to zero so you know that is not why the code re-appears.
|
Hello Arthur,
I've cleared the codes on all pins before but the MAF sensor code is always there after I start the engine.
I am currently looking for vac. diagrams so I can go through every single connection and eliminate that possibility.
Also going to re-check the pin connections from the MAF sensor plug to the ECU plug.
I've got 3 possible faults:
- MAF sensor failure
- vaccum leak / un-metered air
- ECU / wiring fault
Thanks for all your help.
Miguel R.