Originally Posted by Arthur Dalton

All that you have done is to clear the code..then you start the car and the code comes back....so, I want you to clear the MEMORY in the ECU back to Normal.

After you clear the code and get a Single blink, then wait 2 sec, hold the button again for 6 sec..then turn key off for 10 secs , On for 10 secs , and then start the car...Now you have a cleared memory in the module...otherwise you have to run the car for a bunch of drive cycles for it to self re-adapt.
Your ECU memory is out of spec from the prior repair.
You are confusing Code clear and Memory clear...nothing to do with one another, except the CE module sees an out of wack memory/fault at the Module, so it just keeps popping the code. So, clear the MEMORY>>>>>