Quote:
Originally Posted by Diesel911
If you had to you could use a regular lalstic 2 pronged fuse and holder wired to the fuse terminals. You would have to buy the fuse holder that can take the 80 amps and an 80 fuse for it and some eye type connectors for the wire ends would be nice.
|
I did just that and used an 80 amp maxi fuse to bridge the gap. It blew as soon as I gave the glow plugs power. All of the wires going to the plugs look fine, but one of them must be shorting out somewhere, or a short somewhere in that wiring harness.