Quote:
Originally Posted by JonL
Some advice.... Pull the plugs. Not familiar with your particular engine, but disconnect the primary wires from the coil so it won't spark. Crank the engine over for 10 seconds or so at wide open throttle with the plugs out and a rag over the plug holes. That'll help clear out a lot of the "flooding." Then put in NEW spark plugs. Reconnect the coil and everything else. Then start with your full lean - 180 degree turns again.
|
Yea, actually did that before giving it another go to get whatever was trapped out of there. Anyhow, seems like the screw that does the adjusting at the bottom is stripped?
There's no feel of engagement or that slight resistance when turning anymore. I tried for a good 20 minutes just trying to get that damn screw, I even tried 2.5mm, 4mm and similar SAE allen wrenches. Next move is to get a new 3mm and give it another shot. If that fails, it'll be time for a new lambda tower.