real easy- make sure you mark the driveshaft for re-install. I use cardboard or tape to mask it lengthwise and hit it with spray paint- that leaves a nice big mark which you cant mis-install.

are you going to have the bearing pressed on, or DIY?? DIY would require a puller and a piece of the right size pipe= either a search or bringing the bearing to the HDW store will give you the size.

otherwise basic metric tools are all that you need.- 15&17mm on the flex disc, and 13? on the bearing hanger- this you'll need at least 6" ext on your socket. channel lock to loosen up the slip yoke. thats about it.

__________________
1984 123.193 372,xxx miles, room for Seven.

1999 Dodge Durango Cummins 4BTAA 47RE 5k lb 4x4 getting 25+mpgs, room for Seven.