Quote:
Originally Posted by mobetta
How does the modulator come out? (unscrew it?)
|
It is retained by a plate held in by two screws. Once the plate is removed, the modulator should pull out.
Quote:
Originally Posted by mobetta
do I need to re-set the pressure, even If I am just replacing the oring and using the same modulator?
|
Probably not.
Quote:
Originally Posted by mobetta
will I need a new "pin"?
|
If you have a plastic pin, odds are at least even that you will break it when you remove the modulator. Pulling the modulator straight out will decrease the chances that you will ruin the pin.