Quote:
Originally Posted by tinypanzer
Well, I bit the bullet today and shelled out about $250 for parts to get this project going.
I got:
1) Victor-reinz head gasket kit. (includes timing seal and intake/exhaust gaskets)
2) Valve guides
3) Valve seals
4) Timing chain, and guides.
5) Bolts and washers.
I wanted to get more things, like fan clutch and air pump pulleys, but my money is getting low these days and I figured I'll just wait until I get the thing apart before making my second parts list.
Of course, when I do this job I will document it and take pictures to share here......
-tp
|
Be prepared because there is always something extra to fix when you actually have the head off
Are you going to clean the tops of the pistons? I suggest also getting a couple big cans of degreaser and replacing all the hoses that are difficult to replace such as the waterpump->head...that small 3/4inch one.
Quote:
Originally Posted by fastcar
please do so i need to do this also.
|
If you click on my profile and view my threads I have an entire thread on my head removal with a TON of pictures.