Quote:
Originally Posted by emerydc8
Check out my post on this. Mine was a 93, but it was made in late 92. I believe the two power steering pump bracket bolts went from the back of the bracket towards the front and they were 13 mm. I didn't have to loosen the motor mounts, but it is a tight fit to snake your arm up there to reach the bolt heads. As I recall, I had to lay on my right side with my feet pointing forward to get my arm and wrist to bend so I could reach them.
http://www.peachparts.com/shopforum/showthread.php?t=234124&highlight=400e+power+steering+pump |
emerydc8, your other post (and photos) were a HUGE help. Thanks for posting all that info! Based on your pics, I was able to remove the pump from the bracket, without removing the bracket from the engine. The two Allen-head (socket-head cap screws) which screw into the rear of the bracket take some creativity to access, but with those out, the rest was a breeze. I will take some pics of my project and post them on your other thread. I hope to have everything back together later today...
