Quote:
Originally Posted by gschira
One more question on the wheel bearings. As I do not yet own a service manual, how tight should the front wheel bearings be? Thanks again........
|
Tighten the bearing lock nut (on the end of the spindle) until its difficult to turn the wheel, then back it off like 1/3 turn....or until the wheel turns easily again....it doesn't take much. Its a pretty tight spec.
Then lock the little allen bolt on the lock nut. Don't forget that!
__________________
-diesel is not just a fuel, its a way of life- 
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|