I have a 97 E300D with engine oil leaking from my injector pump. In the picture its coming out of the panel 152, on the side. The bottom seems okay.
I bought the new neoprene seal from MB for $20. It looks like the shut off valve would have to come off as well as the clearance seems a bit doubtful.
I then noticed, that the upper left bolt is missing. So, I am going to try to just install the bolt and see if the leak goes away. Is it common for these to leak oil? Is there a torq setting for the 6 screws? Does anyone have a drawing the shows the pitch/size/lenght?

Bill

Attached Thumbnails